The Linear Actuator Control Board is a stand-alone closed-loop control board specifically designed for Actuonix "P" series actuators. The LAC greatly simplifies designs by saving the development time, cost, and processor overhead associated with direct motor control. As little as 1 digital or analog output is required for position control. Supported input signals include USB, Voltage, Current, RC Servo, and PWM. On board adjustment of speed, sensitivity, and stroke limits are available.
The LAC can be operated as both an interface board, or as a stand alone controller with the addition of an external potentiometer and power supply. Each LAC Board controls 1 linear actuator and will require an external power supply rated for the actuator.
The LAC will work with the
PQ12-P, L12-P, L16-P and P16-P series actuators. It may also be able to drive other larger actuators that have position feedback.
A 6vdc or 12vdc power supply is required for operation (not included)
Note: If you buy a "P" series actuator and an LAC at the same time, you get the LAC for 1/2 price! Look for the "Add LAC?*" button when purchasing a "P" series actuator and save!
NOTE: Pricing is in US dollars
Product weight is 19.5g
Download the LAC datasheet here: LAC Datasheet
Download the LAC Servo Actuator Quick Start Guide. This is for using our LAC with the larger feedback actuators such as those by Firgelli Automations via RC: Servo Actuator Quick Start
Download the LAC USB Control & Configuration Guide here: LAC USB Control & Configuration Guide