Use this kit to connect your "S" type linear actuator to a voltage source and be able to control the directionKit Contains:
manually. Simply push the button once to extend, and again to retract. The switch can be lighted if desired, color is blue. The included fuse will protect the circuit from shorts and overloading. Not included in this kit, is the required power supply (6 or 12volts DC, 5A Max). You may also require more wire so you can position the button the required distance from the actuator.
1 DPDT button and o-ring
1 connector and wire loom
8 pieces of heat-shrink
For wiring instructions see the datasheet: DPDT Button Kit