Stepper Motor Linear Actuators

Longer life actuators for lighter load applications. The brushless stepper type motor allows continuous operation(100% Duty Cycle), and longer motor life since there are no motor brushes to wear. Consider the P8 -ST for tight spaces, or when higher forces are required. Step motor based actuators also allow very small stepped type movements.

P8-ST
Our most compact stepper actuator. Two gear ratio options provide significantly higher force output than the S20.
S20
Our longest life actuator. Available in 4 different stroke lengths: 15mm (0.59"), 30mm (1.18"), 50mm (1.97") and 100mm (3.93") .

P8-ST Micro Stepper Actuator 10mm stroke 165:1 gearing

$70.00

In Stock.

Add To Cart

P8-ST Micro Stepper Actuator 10mm stroke 49:1 gearing

$70.00

In Stock.

Add To Cart

P8-ST Micro Stepper Actuator 100mm stroke 165:1 gearing

$70.00

In Stock.

Add To Cart

P8-ST Micro Stepper Actuator 100mm stroke 49:1 gearing

$70.00

In Stock.

Add To Cart

P8-ST Micro Stepper Actuator 25mm stroke 165:1 gearing

$70.00

In Stock.

Add To Cart

P8-ST Micro Stepper Actuator 50mm stroke 165:1 gearing

$70.00

In Stock.

Add To Cart

1 2 3 Next Page View All

The S20 is a rod-style actuator that is built off of our popular L12 platform. Rather than using a DC motor and gearbox, this actuator consists of a NEMA 8 motor mounted directly to the actuator shaft. The S20 offers high-precision positioning in a very compact package that is ideal for mounting in tight spaces. The S20 is available in four different stroke lengths: 15mm (0.59"), 30mm (1.18"), 50mm (1.97") and 100mm (3.93") to ensure that we offer a stepper actuator solution that will work with your design.

Features:

Compact design
4 available stroke lengths
Continuous Duty Rated
Our longest life actuator

The P8 stepper actuators are complete, self-contained linear motion devices. They comes in 10mm, 25mm, 50mm, 75mm and 100mm stroke length options to allow these to fit a wide variety of applications.

The brushless stepper design makes the P8-ST one of our longest life actuators. The 2 gear ratios provide higher forces than the S20.

The P8 stepper is designed to push or pull a load axially along its full stroke length. The speed of travel is determined by the step frequency, and maximum force by the current applied. When power is removed the actuator will hold its position, unless the applied load exceeds the back drive force. Actuators should be tested in each specific application to determine their effective life under those loading conditions and environment.

Features:

Compact design
2 gear ratios provide higher force options
5 available stroke lengths
Continuous Duty Rated

Stepper Motor Linear Actuators

Products [15]

Mailing List